Belonging category：Funeral refrigeration Publishing Date：20240114 views：3
Specifications, parameters and requirements of solid wood farewell table in funeral parlour
1. Specification of farewell table: L6000*W5000*H1100mm
2. Farewell table material: solid wood and solid wood veneer.
3. Pattern: tenon design is adopted at the four corners, which is firm and beautiful, with special shape. There is a railing technology beside it, which can hold flowers, and the railing frame is carved with traditional wood carving technology patterns.
4. Opening mode: fully automatic one-button remote control is adopted for opening, which can be pushed by hand; There is a pattern board right in front.
5. Coffin: The external material is made of titanium panel (thickness 1.0mm), and the internal material is made of embossed aluminum plate (thickness 0.8 mm) specially used for freezer after oxidation and anticorrosion treatment, and the rosewood flower plate is edged. Coffin cover: Double-layer PC transparent cover with a thickness of 4mm, which can bear 80Kg and has good daylighting.
6. Flower table: the fence is carved with handmade solid wood and inlaid with gold paint, which is luxurious and solemn.
7. Power-assisted guide wheel: industrial wear-resistant nylon wheel φ 30 * 30 (mm)
8. Condenser: air-cooled fin copper coil condenser.
9. Insulation layer: Polyurethane foam material is foamed at high pressure, with a thickness of 100mm and a density of 50 kg/m3.
10. Rated temperature:-25 C
11. Input power: 478W*2
12. Power supply: 220V 50Hz
13. Unit form: totally enclosed compressors (2 sets)
14. Refrigerant: R404A
15. Temperature control: Microcomputer full-automatic temperature controller, which will give an audible and visual alarm prompt when it fails to reach the set temperature for a long time, and can set the temperature manually. When the voltage is unstable, the compressor can delay itself and protect itself. When the compressor is working, it can be defrosted by itself in different periods.
16, functional characteristics
1) If the microcomputer automatic rotating unit fails when the A unit is working, it will automatically rotate to work for the B unit, and it can work for both systems at the same time (strong cooling) or manually switch the AB unit to work in rotation, so as to ensure that the temperature in the cabinet is below minus 25 degrees, and avoid carrion and unnecessary disputes.
2) The rotating work of AB unit can be manually switched to prolong the service life of compressor.