Belonging category：Funeral refrigeration Publishing Date：20240114 views：3
Professional funeral refrigeration equipment manufacturers introduce you to the technical parameter requirements of Sanmen Taiping cabinet.
1. Specification of Taiping cabinet: external dimension: L2200*W920*H2140(mm)
2. External wall of the remains freezer: 304 stainless steel.
3. inner container of Taiping cabinet: the embossed aluminum plate for freezer after deoxidation and anticorrosion treatment is 0.8mm thick.
4. Cabinet door: 304 stainless steel
5. Frame: stainless steel square pipe 25*25*1.2(㎜)
6. Pallet: stainless steel pipe, stainless steel plate specification: 1960*600(mm)
7. Power-assisted guide wheel: industrial wear-resistant nylon wheel, never rusted φ 30 * 30 (mm).
8. Refrigeration control mode: direct cooling and double-machine refrigeration.
9. Unit configuration: overhead unit.
10. Evaporator: Direct-cooled evaporator with built-in copper coil, without solder joint design.
11. Condenser: air-cooled corrugated copper coil condenser, ultra-quiet fan.
12. Thermal insulation layer: polyurethane foam with overall high-pressure temperature recovery (thickness 100㎜) with a density of 50kg/m.
13. Rated temperature:-25 C
14. Input power: 378W*2
15. Voltage: 220 V 10%
16. Power supply: 220V 50Hz
17. Unit form: totally enclosed compressor.
18. Refrigerant: R404a
19. Temperature control of corpse freezer: microcomputer automatic temperature controller, which will give an audible and visual alarm prompt when it fails to reach the set temperature for a long time, and can set the temperature manually. When the voltage is unstable, the compressor can delay itself and protect itself.