Belonging category：Cremation equipment Publishing Date：20240114 views：3
Environmental protection equipment for relic incineration is a special equipment developed for burning relics, especially a relic incinerator which can be burned without oil supply, and can automatically collect slag, smoke, dust and pollution-free, including an automatic ash leakage device, a main combustion chamber, a secondary combustion chamber, a smoke elimination chamber, a settling dust removal chamber, a cold-heat conversion processor, a dust collector, slag removal and a slag collection device. With the movable incineration trolley entering the preparation room and then burning in the main combustion chamber, the flue gas passes through the main combustion chamber and the secondary combustion chamber directly enters the smoke elimination chamber during the combustion process, and the dust collected by settling is directly discharged into the dust removal pipeline through the settling dust removal chamber. The flue gas is cooled by the cold-heat converter, and the dust collector automatically blows back the pulse to clean the dust. The tail gas after purification reaches the standard is discharged from the chimney, and the dust collected by settling is discharged into the dust removal pipeline through the dust outlet, and then discharged into the slag collection pool. Due to the special purpose of the product, the appearance can be designed separately according to the requirements of local customs.
New energy-saving and environment-friendly relic incinerator. This equipment is an incinerator specially designed for burning wreaths, paper products, clothes, funerary objects, flowers and various sacrificial objects according to funeral parlours and cemeteries. It can not only automatically collect slag centrally, but also make full use of the heat energy generated by the burning of the burned objects to inject oxygen into the flue gas for multiple times, thus achieving the purposes of smoke elimination, bacteria elimination and odor removal.
The work flow of relic burning cremator is: relics and memorial items enter the main combustion chamber to burn. During the whole combustion process, the combustion products pass through the main combustion chamber, the secondary combustion chamber and the smoke elimination chamber and then enter the settling and dust removal chamber; Dust outlets are arranged at the lower ends of the main combustion chamber and the settling and dedusting chamber, which can directly discharge the dust collected by settling into the dedusting pipeline. The flue gas is cooled by the cold-heat conversion processor, and the cyclone dust collector and the negative pressure bag dust collector automatically blow back pulse dust removal. The purified tail gas is automatically discharged from the chimney, and the dust collected by settlement is discharged into the dust removal pipeline through the dust outlet, and then discharged into the slag collection tank.