Belonging category：Cremation equipment Publishing Date：20240114 views：4
Technical parameters and performance configuration of high-grade wreath relic incinerator
The main components of the system are: incinerator body, oxygen supply system, fuel supply system, combustion system and electric control system.
1.1 Main performance parameters
(1) Fuel requirements:-30 # ~ 0 # light diesel oil.
(2) Furnace working pressure range:-5 ~ -5～-30Pa.
(3) Furnace working temperature: 650℃ ~ 1000℃.
(4) Incineration capacity: 150Kg/ hour, normal continuous incineration.
(5) Smoke exhaust mode: upper smoke exhaust.
(6) The exterior decoration of the incinerator is made of 304 stainless steel small plates, which are integrally bent and installed with concealed buttons, and the appearance is high-grade, solemn and generous.
(7) Service life of incinerator: normal use for more than 10 years.
1.2 Main configuration technical parameters
(1) Incinerator body
① Furnace
1) The combustion chamber of the furnace is built with high-temperature resistant bricks, and the heat resistance is not lower than 1000℃.
2) High-density aluminum silicate ceramic fiber felt with a temperature resistance of not less than 1000℃ and a thermal conductivity of less than 0.2 w/(m k) at an average temperature of 600℃ is used as the thermal insulation material around the furnace body, and the total thickness is not
Less than 60 mm.
2) Thermocouple for furnace: Class II industrial thermocouple with K division is adopted, and the temperature range is 0-1300℃.
② oven door
1) The interior of the oven door is pressed with high temperature resistant blanket.
2) Designed with emergency manual operation function, the oven door can be easily opened and closed to ensure foolproof.
3) The transmission part is scientific and reasonable, the structure is stable, the sensitivity, reliability, durability and accuracy have reached a fairly high level, and it can be opened and closed for hundreds of times without failure.
③ furnace bar
1) The furnace bars shall be load-bearing and high-temperature-resistant, made of high-quality heat-resistant cast iron or better materials, with the advantages of high-temperature resistance, corrosion resistance, full combustion, high stability and long service life.
(2) Fuel supply system
① The fuel supply system is designed by combining fuel with gas, which is convenient for later refitting.
② Oil pipes and valves must be resistant to high temperature and corrosion.
(3) Combustion system
① The burner is equipped with an angle adjusting device, which has good atomization effect, reasonable air-oil ratio and adjustable angle, and the combustion angle can be adjusted at any time according to the combustion situation.
(2) the burner adopts brand-name energy-saving and environmental protection burner, and has a large and small fire control device.
③ ignition match is used to ignite the fuel, which is safe and reliable.
④ The main burner is equipped with a high-temperature baffle protection device to ensure the use effect of the burner.
(4) Electronic control system
① The industrial control products involved, such as PLC, man-machine interface, module, frequency converter, etc., are made of brands, and the resolution of man-machine interface display screen is required to be 800×600, and the size is 15 inches.
② The installation position of electrical control cabinet should meet the requirements of heat protection and convenient maintenance of electrical equipment.