Belonging category：Cremation equipment Publishing Date：20240114 views：7
Technical requirements of tail gas treatment equipment for incinerator in funeral parlour
1 cooling processor 3800×1500×3000 mm
2 cyclone processor φ 1000× 4200mm
3 bag filter 2000×2000×4300 mm
4 activated carbon purification 1500×1500×2000 mm
5. The power of induced draft fan is 15kw (pressure is 3600 Pa and flow rate is 13000 m3).
6 air compressor power 7.5kw
7 Forced cooling power 3kw
8 Automatic ash collection power 1.5kw
9 Dust removal efficiency is 98%
10 power of auxiliary filter is 2.2kw
11 ★ Dust removal mode ★ Cyclone dust removal and bag filtration
12 Automatic pulse back blowing in ash cleaning mode
13 ★ Cooling mode★ Air cooling (forced cooling)
The dioxin control rate is 95%
15 Flue gas treatment capacity is 10000 m3.
16 control mode integrated circuit micro-touch control panel
The purification rate of activated carbon is 98%
18 The filtration area is 100m2.
19 material GB 5mm
Note: The service life of tail gas treatment equipment is not less than 20 years.