Belonging category：Cremation equipment Publishing Date：20240114 views：2
Tibetan relic incinerator and its flue gas treatment system
Tibetan funeral customs and culture are characterized by celestial burial, and the relics of the deceased are differentiated around the celestial burial platform. According to the characteristics of Tibetan customs and the requirements of environmental protection in Tibetan areas, a relic incinerator suitable for Tibetan funeral customs and culture and environmental protection requirements is developed.
Considering that the relics of the deceased in Tibet are burned around the celestial burial platform, which is remote, the natural conditions are limited and the air pressure is low, it is of great significance to design in line with Tibetan customs and culture and environmental protection while minimizing the installation and construction of equipment.
In order to deal with the incineration of relics and the flue gas generated during incineration more quickly and conveniently, a vertical relic incinerator with tail gas purification treatment equipment and workshop design scheme that conforms to Tibetan characteristics is designed. It has been proved by practice that the incineration equipment has good use effect, solemn appearance, and the whole furnace body is integrated, shaped like an ancient tripod, which means a complete life. The flue gas purification treatment can meet the requirements of the national standards for the purification of incineration flue gas, and it is a relic incineration equipment which is very suitable for Tibetan funeral customs and cultural characteristics.
The structure of the incinerator is divided into three parts: the upper part, the middle part and the lower part, all of which are filled with fire-resistant and heat-insulating materials, and the dust removal and flue of the incinerator are behind the incinerator. In the design of incinerator, lining design is very important. Lining, also known as masonry, is made of refractory, heat insulation and some building materials.
Under the transportation conditions, the design diameter of the furnace body is 2.2 meters, and the furnace body can bear high-temperature hot core, which reduces the heat storage and heat dissipation of the furnace body and makes the combustion more efficient and energy-saving.
The feeding oven door is double-split, and the oven door is filled with refractory material, which is not deformed and resistant to high temperature, so as to prevent the operator from being scalded.
The grate in the furnace body is an important part commonly used in stoves. The casting of HT250 not only strengthens the contact volume between the incinerator and the air, but also prevents large objects from falling. The integrated design of the furnace body is completed, and it can be used after simple installation at the site, which is convenient and fast.
Design of flue gas purification treatment system for incinerator
An important part of the incinerator flue gas purification design is designed according to the large incineration capacity of the incinerator. According to the standard manual, the flue gas production capacity of the 2.2-meter diameter incinerator is about 6000 cubic meters per hour. Based on years of experience design and local climate conditions, our company adopts cyclone pretreatment and water curtain desulfurization, and then discharges it after drying and purification.
Flue gas flow of relic incinerator
Relics-Incinerator incineration-flue-cyclone pretreatment-primary desulfurization and deacidification-secondary dust removal-tertiary dust removal-cooling-dehydration-condensation-induced draft fan-water-gas separation-chimney