Belonging category：Funeral refrigeration Publishing Date：20240114 views：3
Description of technical parameters of three body freezers in funeral parlour and corpse freezers in morgue:
1. Specification of Taiping cabinet: external dimension: L2200*W920*H2140(mm)
2. External wall: 304 stainless steel
3. Inner container: 0.8mm thick embossed aluminum plate for freezer after deoxidation and anticorrosion treatment.
4. Cabinet door: 304 stainless steel
5. Frame: stainless steel square pipe 25×25×1.2(㎜)
6. Pallet: stainless steel pipe, stainless steel plate specification: 1960×600(mm)
7. Power-assisted guide wheel: industrial nylon wheel, which will never rust φ Φ30×30 (mm).
8. Unit configuration: overhead unit, three compressors, single-door and single-control refrigeration system, which can independently refrigerate and use each door, saving energy, environmental protection and space, and facilitating heat dissipation and maintenance.
9. Evaporator: Direct-cooled evaporator with built-in copper coil, without solder joint design.
10. Condenser: air cooled
11. Thermal insulation layer: polyurethane foam with overall high-pressure temperature recovery (thickness 100 ㎜) with a density of 50kg/m3.
12. Rated temperature:-25 C
13. Input power: 378W*3
14. Voltage: 220 V 10%
15. Power supply: 220V 50Hz
16. Unit form: totally enclosed compressors (3 sets)
17. Refrigerant: R404a
18. Temperature control: microcomputer automatic temperature controller, which will give an audible and visual alarm prompt when it fails to reach the set temperature for a long time, and can set the temperature manually. When the voltage is unstable, the compressor can delay itself and protect itself. When the compressor is working, it can be defrosted by itself in different periods.
19. Functional features: responding to the call of the state, it is green, energy-saving and environmentally friendly, with low power consumption. Each refrigeration system is used independently, and cabinets are sealed with each other, without odor, with low power consumption, with only 0.38 kWh per door per hour.