Belonging category：Funeral refrigeration Publishing Date：20240114 views：4
The manufacturer of Taiping cabinet in funeral parlour introduces the technical requirements of corpse refrigerator and special three-drawer three-control refrigerator for funeral parlour:
Product specification (length× width× height): 2565× 895× 2040mm (1%); Specification of tank (length× width× height): 2022× 695× 482 mm (1%); Stretcher (length× width× height): 1930×635×38mm(±1% (1%) Condenser (length× width× height): 280×200×230mm(±1% (1%)
1. Overall description of freezer
The freezers of our company are all closed, with reasonable structure, beautiful shape, fast refrigeration, low noise, low power consumption and long service life. The refrigerator adopts microcomputer temperature controller, which has the advantages of high temperature measurement accuracy, wide temperature control range and intuitive digital display, and completely solves the unknown phenomenon due to the rising temperature in the refrigerator.
The insulation layer of the freezer is made of energy-saving and environmental-friendly polyurethane, which has good insulation performance; Double liner, the inner layer is made of embossed aluminum plate, and the outer layer is made of high-quality stainless steel plate. Stainless steel is punched with U-shaped holes, and the punching density is 45 holes/㎡, and the copper tube is exposed. The evaporator is made of high-quality copper tube, and the refrigeration compressor is zanussi compressor. The external material is decorated with stainless steel wire drawing plate (No.1.0), which is anti-corrosive and easy to clean.
2. Technical configuration of freezer:
1. The exterior decoration is imported 201s brushed stainless steel (No.1.0);
2. The evaporator is made of 8×0.75 high-quality copper tubes;
3. The thermal insulation layer is made of energy-saving and environment-friendly polyurethane, which has good thermal insulation performance; The insulation layer is foamed at 30Kg/m with a thickness of about 10cm.
4. Double-layer liner, the inner layer is made of embossed aluminum plate, and the outer layer is made of high-quality stainless steel plate. Stainless steel is punched with U-shaped holes, and the punching density is 45 holes/㎡, and the copper tube is exposed. Fast refrigeration effect, good sealing, strengthening refrigeration temperature constant temperature;
5. When the refrigeration temperature is -15℃ ~-30℃ (when the temperature reaches-15℃, the compressor will stop automatically to save energy. );
6. The average daily power consumption is about 8 degrees;
7. The compressor model GTM 12A/HTH 12AT adopts single-phase electricity with a power of 240W/ set.
8. Fluorine-free refrigerant R134A;
9. The compressor adopts zanussi closed compressor, and the three groups of thermostats control the three groups of compressors respectively to realize independent control.
10. Contactor: Zhengtai
11. Temperature controller: digital, microcomputer controlled, with the advantages of high temperature measurement accuracy, wide temperature control range and intuitive digital display, completely solving the unknown phenomenon of temperature rise in the cabinet.
12. The power supply voltage is 220VAC±10% plus or minus 10%
13. Power consumption of thermostat: < 4W
14. Power consumption of freezer: ≤ 800 W.
15. Temperature display range:-40℃ ~+50℃, 0.1℃ display accuracy.
16. Measurement accuracy: 1℃
17. Adjustment range of temperature overrun alarm: 0 ~ 20℃