Belonging category：Cremation equipment Publishing Date：20240114 views：2
Heritage Incinerator is a place where crematoriums and refining plants burn some funeral supplies. If there is no special incinerator, it is often found anywhere to burn it, which is not environmentally friendly and has potential safety hazards. Our factory designed and produced a heritage incinerator for this situation, which can change this situation.
The relic incinerator produced by our factory is automatically fed by machinery and discharged manually. Cooperate with this combustion-supporting system to support combustion, let the furnace ignite and assist the furnace to raise the temperature (when the heat value of garbage is low and it cannot maintain its own combustion). The oil tank is used as a daily reserve of burning oil, and a filter is added in it to remove impurities in the oil; Pressurized by the burner oil pump, it is sprayed into the first combustion chamber and the second combustion chamber, and mixed with the primary air blown by the burner fan to complete the whole process of ignition, combustion and burnout.
Generally, light diesel burner is used as the burner. It has the functions of automatic management of combustion program, flame detection, automatic judgment and fault prompt. The burner can be automatically ignited under the control of the program controller. The oil pump of the burner is equipped with an oil filter screen to protect the gear; Built-in pressure regulating valve ensures the stability of outlet oil pressure.
High-pressure fuel is atomized through nozzle holes and fully mixed with air, and then it burns evenly and smokeless. The burner has the functions of automatic ignition, fire protection, fault alarm, high flame intensity, stable combustion, good safety and large power adjustment.
The function of large and small fire can be selected according to the requirements of combustion power (for automatic adjustment by the fan), and the fuel quantity can also be adjusted by adjusting the oil supply pressure. Then the waste, combustion air and auxiliary fuel undergo complex chemical reactions in the furnace, so that the harmful substances in the waste are completely oxidized and decomposed. The structure and size of the furnace and furnace body determine the treatment capacity of the incinerator and the decomposition and removal rate of harmful substances in the waste. The furnace body is equipped with a burner. After the furnace is heated to a certain temperature by the burner, the waste is put into the furnace for ignition.
The secondary combustion chamber is equipped with a burner to burn the organic gas that is not completely burned in the flue gas. The relic incinerator is also equipped with a unique air supply device to supplement the oxygen needed for waste combustion, and the pyrolysis and combustion temperature in the incinerator can be controlled by adjusting the air volume in the incinerator.
Considering the characteristics of domestic waste, I adopt fixed hearth furnace according to my previous practical experience, and its characteristics are as follows:
A. In the design of oxygen supply for combustion, small-hole high-pressure turbulent air injection technology is adopted, and there are many air injection holes on the furnace wall, and its unique air supply mode makes the combustion in the furnace faster and more sufficient. The burning and removal rate of organic matter is over 99.9%.
B during normal operation, there is slight negative pressure in the furnace, which ensures the safety of operation.
C, according to the user's requirements, choose and match the artificial feeding method. In order to ensure the combustion effect, we also added a secondary combustion chamber separately. The shell is made of steel structure, the inner wall is made of high-quality refractory, and the heat insulation material is lined between the steel plate and the refractory, so that the heat is not easy to spread out. Combustible gases and particles contained in the flue gas entering the secondary chamber are further burned with the help of the burner flame and secondary air, so that the temperature of the secondary chamber is maintained above 850℃ and the harmful substances contained in the flue gas are fully burned out. Our relic incinerator uses a high-pressure centrifugal fan, which is specially designed and produced at a fixed point, ensuring the best effect of flue gas turbulence during combustion in the furnace, and adding a silencer to ensure that the noise generated by the fan meets environmental protection standards.
Welcome friends to inquire and communicate, or visit our factory. The relic incinerator produced by our company also improves the destruction rate of harmful substances produced by the incinerator through the following factors: incineration temperature, residence time, degree disturbance and air demand. Finally, after cooling, absorption, dust removal and other purification treatments, the high-temperature flue gas produced after secondary combustion meets the national emission standards. Welcome to inquire and exchange our heritage incinerator.